Epson 11880 - Stylus Pro Color Inkjet Printer Manual de desembalagem e configuração - Página 18

Procurar online ou descarregar pdf Manual de desembalagem e configuração para Impressora Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 páginas. Stylus pro11880
Também para Epson 11880 - Stylus Pro Color Inkjet Printer: Manual de referência rápida (14 páginas), Brochura (1 páginas), Brochura e especificações (8 páginas), Manual da rede (46 páginas), Manual de informações do produto (10 páginas), Garantia limitada (12 páginas), Brochura e especificações (7 páginas), Brochura e especificações (8 páginas)

Imprimir página
Epson 11880 - Stylus Pro Color Inkjet Printer Manual de desembalagem e configuração
Printing a status sheet
1. Press the Paper Source
Roll Auto Cut On
2. Press the Menu
button to enter Menu
mode.
3. Press the Paper Feed
TEST PRINT, and then press the Menu
button.
4. Press the Paper Feed
STATUS SHEET, and then press the Menu
button.
5. Press the Enter
button to print a status
sheet.
After printing is finished, follow the message
on the LCD panel to return to the READY state.
16
button to display
.
button to display
button to display

Loading the Cut Sheet Media

To load cut sheet media longer than Super A3/B
(483 mm), see the next section. To load cut sheet
media with a length of Super A3/B (483 mm) or
below, see "Loading cut sheet media with a length
of Super A3/B (483 mm) or below" on page 18.
If you are printing on thick paper (0.5 to 1.5 mm),
see "Printing on thick paper (0.5 to 1.5 mm)" on
page 19.
Note:
When you use paper other than Epson special media,
see the instructions included with the paper, or contact
your supplier for more information.
Loading cut sheet media longer than
Super A3/B (483 mm)
1. Make sure that the printer is on and the roll
paper cover is closed.
2. Press the Paper Source
until Sheet
appears.
3. Make sure that the Paper Check light is on,
and then set the paper lever to the released
position. LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
The paper lever may be locked if REMAINING
PPR SETUP is set to ON: AT ROLL EXCHANGE. In
this case, press and hold the Enter
for 3 seconds to print the barcode, so you can
release the paper lever.
button repeatedly
button