ayerbe AY - 1600 Manual de instruções - Página 17

Procurar online ou descarregar pdf Manual de instruções para Aspirador de pó ayerbe AY - 1600. ayerbe AY - 1600 19 páginas. Wet and dry vacuum cleaner

Imprimir página

7. CARTRIDGE FILTER MAIN-

TENANCE

WARNING! Always disconnect the plug

from the wall outlet before removing the

tank cover.

NOTICE! This filter is made of high

quality paper designed to stop small

particles of dust. The filter should be used

for dry pick-up. A dry filter is necessary to

pick up dust as when the filter is wet, the

filter will clog quickly and be very difficult

to clean.

Handle the filter carefully when removing

it for cleaning or when installing it. Check

the filter for tears or small holes as even a

small hole can let dust pass through and

out of the cleaner. Do not use a filter with

holes or tears, replace it immediately.

Installing &Cleaning

7.1. Slide the cartridge filter down over

filter basket and push fully home.

(fig.1&2)

7.2. Place ﬁlter retainer on top of car

tridge ﬁlter.

7.3. Hold onto base of lid cage with one

hand and turn retainer clock wise

tighten.

7.4. When removing the filter for cleaning

hold the cartridge filter to take off

carefully avoid damage it. (fig.3)

7.5. Slide cartridge ﬁlter off ﬁlter cage.

7.6. Clean a dry filter by tapping it inside

a waste can.(fig.4)

7.7. Clean a wet filter by rinsing from the

inside. (fig.4)

7.8. When wet the cartridge filter should

be removed and allowed to air dry

for 24 hours before being refitted

onto the filter basket.

8. TROUBLESHOOTING

1.No power

supply.

Cleaner

2.Faulty

will not

power cable,

operate.

switch or

motor.

3.Container

full of liquid.

Dust

1.dust bag or

comes

cartridge

from the

filter missing

motor

or damaged.

cover.

There is a

Reduced

blockage in

efficiency

the nozzle or

and

hose,

increased

Or the

motor

container

inlet. Or dust

speed/vib

filter blocked

ration.

by fine dust.

- 17 -

1. Check power

supply – cord,

breakers, fuses.

2. Unplug and check

the

power cord. If

damaged,

have it repaired by a

professional.

3.Empty container.

1. Attach or replace

dust bag or cartridge

filter.

Check nozzle, hose

and

container inlets for

blockage. Take off the

filter

and clean it. Or install

new

cartridge filter.