FIALA MOTORS Valach Motors VM R5-250 Manual - Página 7

Procurar online ou descarregar pdf Manual para Motor FIALA MOTORS Valach Motors VM R5-250. FIALA MOTORS Valach Motors VM R5-250 10 páginas.

Manual for motor FM_VM R5_R7 ( Date of publication 01/2018)

Position of the carburetor on the engine, Figures 1 and 2.

Alternative possible position of the carburetor (180 Degrees), Figures 1 and 2.

The engine is designed and constructed to require minimal maintenance. The valve clearance is

checked every 3 hours of engine operation and the valves are lubricated at the same time. Under this

maintenance, the status of the battery for the ignition is checked. Check spark plugs as needed, we

recommend it after approx. 10 hours of operation. Spark plug for the VM 250 R5 is NGK CM 6, for the

VM 420 R5 is NGK CM 6 and the VM R7-800 is used with the DENSO W 14MPR-U10, the M14x1,25

thread (electrode distance 0.4mm) or the Bosch CM-6RO 088 , thread M14x1,25 (electrode distance

0,4mm) or NGK BPMR7A, thread M14x1,25.

The numbering / order of cylinders is from cylinder 1 (upper) to the left - CCW- No.2, 3,4,5 (6,7).

Please use high quality tools for adjusting and maintaining the engine, and do not use "ball" types for

allen wrenches.

Please take extra care when tightening / loosening the M3 screws on the 250 R5 valve cover !

10.1.

Adjusting valve clearances – only on cold motor!

FIALA PROP s.r.o, Vysoká 56, 75641 LEŠNÁ , Czech Republic , e-mail: [email protected]

Page 7