FIALA MOTORS Valach Motors VM R5-250 Manual - Página 8

Procurar online ou descarregar pdf Manual para Motor FIALA MOTORS Valach Motors VM R5-250. FIALA MOTORS Valach Motors VM R5-250 10 páginas.

Manual for motor FM_VM R5_R7 ( Date of publication 01/2018)

The correct valve clearance is cold engine 0.1 mm. Is set with the gauge and tools attached.

Adjustment procedure: Loosen the nut, place the gauge between the rod and the rocker arm and

adjust gradually screwing the clearance so that the gauge was sliding grip. Then tighten the nut

again. After tightening, check the valve clearance again. The following pictures will tell you more. We

set the cylinder in front of and behind the cutting machine.

10.2.

Lubrication rockers

Always when checking / adjusting valve lash perform simultaneously lubricate the rocker. We

recommend oil Motul Chain lube Off road or similar quality oil for lubrication of motorcycle chains

with temperature determining to 150 ° C. How and where to apply grease is seen in the photograph.

At the same time, or at least from time to time it is necessary to check the cleanliness of the motor,

status / battery condition for ignition and the gap between the spark plug electrodes. This should be

set to 0.4 mm. When the electrodes are burnt, replace the spark plug.

FIALA PROP s.r.o, Vysoká 56, 75641 LEŠNÁ , Czech Republic , e-mail: [email protected]

Page 8