Digilent PLTW S7 Manual de referência
Procurar online ou descarregar pdf Manual de referência para Placa-mãe Digilent PLTW S7. Digilent PLTW S7 11 páginas.
Imprimir página
PLTW S7 Reference Manual
Revised July 11, 2018
This manual applies to the PLTW S7 rev. A
Overview
The PLTW S7 is a small, 48-pin DIP form factor board built around a Xilinx Spartan-7 FPGA. 32 FPGA digital I/O
signals, 2 FPGA analog input signals, an external power input rail, and a ground are routed to 100-mil-spaced
through-hole pins, making the PLTW S7 well-suited for use with solderless breadboards. At just 0.7" by 3.05"
inches, it can be loaded in a standard socket and used in embedded systems. The board includes a programming
ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.
Features Include:
•
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
o
3,650 slices containing four 6-input
LUTs and 8 flip-flops
o
1,620 Kbits of fast block RAM
o
3 clock management tiles, each with
a phase-locked loop and mixed-
mode clock manager
o
80 DSP slices
o
Internal clock speeds exceeding
450 MHz
o
On-chip analog-to-digital converter
(XADC)
o
Programmable over JTAG and Quad-
SPI Flash
•
Memory
o
4 MB Quad-SPI Flash
•
Power
o
Powered from USB or 5V external
supply connected to DIP pin 24
DOC#: 6002-500-019
The PLTW S7.
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
•
USB
o
USB-JTAG programming circuitry
o
USB-UART bridge
•
Push-buttons and LEDs
o
2 Buttons
o
4 LEDs
o
1 RGB LED
•
Expansion Connectors
o
1 Pmod connector
▪
8 total FPGA I/O
o
48-pin DIP form-factor headers
▪
32 total FPGA I/O
▪
2 single-ended 0-3.3V
analog inputs to XADC
▪
2 power pins
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.store. digilent.com
Page 1 of 11