Digilent PLTW S7 Довідковий посібник
Переглянути онлайн або завантажити pdf Довідковий посібник для Материнська плата Digilent PLTW S7. Digilent PLTW S7 11 сторінок.
Друкувати сторінку
PLTW S7 Reference Manual
Revised July 11, 2018
This manual applies to the PLTW S7 rev. A
Overview
The PLTW S7 is a small, 48-pin DIP form factor board built around a Xilinx Spartan-7 FPGA. 32 FPGA digital I/O
signals, 2 FPGA analog input signals, an external power input rail, and a ground are routed to 100-mil-spaced
through-hole pins, making the PLTW S7 well-suited for use with solderless breadboards. At just 0.7" by 3.05"
inches, it can be loaded in a standard socket and used in embedded systems. The board includes a programming
ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.
Features Include:
•
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
o
3,650 slices containing four 6-input
LUTs and 8 flip-flops
o
1,620 Kbits of fast block RAM
o
3 clock management tiles, each with
a phase-locked loop and mixed-
mode clock manager
o
80 DSP slices
o
Internal clock speeds exceeding
450 MHz
o
On-chip analog-to-digital converter
(XADC)
o
Programmable over JTAG and Quad-
SPI Flash
•
Memory
o
4 MB Quad-SPI Flash
•
Power
o
Powered from USB or 5V external
supply connected to DIP pin 24
DOC#: 6002-500-019
The PLTW S7.
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
•
USB
o
USB-JTAG programming circuitry
o
USB-UART bridge
•
Push-buttons and LEDs
o
2 Buttons
o
4 LEDs
o
1 RGB LED
•
Expansion Connectors
o
1 Pmod connector
▪
8 total FPGA I/O
o
48-pin DIP form-factor headers
▪
32 total FPGA I/O
▪
2 single-ended 0-3.3V
analog inputs to XADC
▪
2 power pins
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.store. digilent.com
Page 1 of 11