Cres Cor AquaTemp Manual de instalação, operação e manutenção - Página 9
Procurar online ou descarregar pdf Manual de instalação, operação e manutenção para Forno de convecção Cres Cor AquaTemp. Cres Cor AquaTemp 15 páginas. Humidity convection ovens
Imprimir página5925 Heisley Road • Mentor, OH 44060-1833
WARNING
IF OVEN GETS TOO HOT OR WON'T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
1 . Cord is unplugged from wall outlet .
2 . Circuit breaker/fuse to wall outlet is blown .
NOTE: Vent fans will not operate until the control compartment requires ventilation to limit temperatures . Replacement
of electrical components must be done by a qualified electrician.
Refer to our Service Agency list, FL-1400 (found in the back of this manual), of authorized service centers .
Instructions for replacing parts are included in replacement parts list .
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
MAINTENANCE INSTRUCTIONS
TROUBLE-SHOOTING GUIDE, continued
HOW TO ADJUST THE DOOR LATCH:
1 . For vertical (up and down movement) adjustment:
a . Loosen (2) screws located in magnetic strike .
b . Move strike up or down for alignment to magnet on latch .
c . Tighten screws to secure
2 . For horizontal (greater or lesser magnetic draw) adjustment:
a . Loosen (4) screws in door latch .
b . Move latch forward or backward to adjust magnetism .
c . Tighten screws to secure .
TROUBLE-SHOOTING GUIDE
If unit is NOT working, first check the following causes:
Convection
Humidity Oven
Rev. 4 (6/15)
3 . Switch is turned off .
4 . Fuse on back of unit is blown .
FL-2373
Page 9 of 14