Digiop Black BLK-IPE4101 Manual de instalação rápida - Página 3

Procurar online ou descarregar pdf Manual de instalação rápida para Conversor de multimédia Digiop Black BLK-IPE4101. Digiop Black BLK-IPE4101 3 páginas. 4-channel h.264 network video encoder

Imprimir página

Enter the gateway of your computer into the Gateway field.

Click SETUP. A Login window will open.

In the Login window, enter the ID and PW

(password) for your encoder and click Login. The

default administrator values for the ID and PW are

root and pass.

In the IPAdmin Tool window, click Refresh. Verify that the entry with R0,B0,M0 now shows the

new IP address.

Repeat these steps for the other three encoder IP channels.

Step 5.

Setup encoder Basic Configuration

Repeat this step for each encoder channel.

To view video images from any encoder channel, at a computer attached to the LAN where the encoder is

installed, open Microsoft

Internet Explorer

http://<IP address of the encoder>

In this example, the IP address is 192.168.5.20. Enter: http://192.168.5.20

If prompted to install ActiveX controls such as AxAll.cab (publisher Cap Co), AxPTZ, or AxNVC, follow screen

prompts to install the software.

To load these ActiveX controls, you may need to adjust the security settings of your browser to

NOTE

accept add-ins from unknown publishers.

After logging into your encoder, if you cannot see live video from the encoder and the message: "Can not

Create XMLDOMDocument Install MSXML4.0" appears, download and install the MS XML 4.0 library. This

library can be found at:

http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-

C5D7485F2B42&displaylang=en

After the encoder video view screen appears, click the SETUP button in the upper right corner. In the pop-

up window, enter the default User name and Password, root and pass.

In the SETUP window, go to Basic Configuration > Users.

www.digiop.com

and go to:

SETUP Button

In the User list, click root to highlight it, and then click Modify. Enter a new password and click OK. In the

Users screen, click Apply, and then click OK to restart the server.

Go to Basic Configuration > Date & Time.

On the Date & Time screen, set the Time Zone, Method, and Time Synchronization options. Click Apply.

Go to Video & Audio > Video-in.

On the Video Input Setting screen, click the PREVIEW button to open a window showing the video stream

from the camera.

Adjust the Brightness, Contrast, Hue, Saturation, and Sharpness to perfect the video image. After changing

parameters, click Apply.

Click VIEW to exit SETUP mode and return to the video view screen.