Cisco 3020 - Cisco Catalyst Blade Switch Manual de iniciação - Página 25

Procurar online ou descarregar pdf Manual de iniciação para Interruptor Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 31 páginas. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Também para Cisco 3020 - Cisco Catalyst Blade Switch: Manual de iniciação (37 páginas), Especificação rápida (12 páginas), Nota de lançamento (41 páginas), Nota de lançamento (27 páginas), Nota de lançamento (23 páginas), Nota de lançamento (21 páginas), Manual de instalação (21 páginas)

Imprimir página
Cisco 3020 - Cisco Catalyst Blade Switch Manual de iniciação
Insert the cable into the StackWise Plus port on the front panel of the switch. Insert the other
Step 3
end of the cable into the connector of the other switch.
Always use a Cisco-approved StackWise Plus cable to connect the switches.
Figure 11
Inserting the StackWise Plus Cables
S Y S T
U ID
S -M O D E
S -M S TR
S -M M B R
M O D E
C O N S
O L E
S F P 1 9
-2 0
When you remove the StackWise Plus cables from the connectors, replace the dust covers to protect
them from dust.
Removing and installing the StackWise Plus cable can shorten its useful life. Do not
Caution
remove and insert the cable more often than is absolutely necessary.
8
Connecting to the Switch Module Ports
This section describes how to connect to the fixed switch module ports and to the 10-Gigabit Ethernet
module slots.
Connect to 10/100/1000 Ports
The 10/100/1000 Ethernet ports use standard RJ-45 connectors with Ethernet pinouts. The maximum
cable length is 328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5,
Category 5e, or Category 6 UTP cable. The 10BASE-T traffic can use Category 3 or Category 4 cable.
1 9 -2 0
2 3 x
2 1 -2 2
S F P 2
1 -2 2
2 4 x
S T K A
S T K B
2 6 x
W S -C B
S 3 1 2 0
G -S
25