Cisco Catalyst 2960-X Manual de instalação do hardware - Página 19
Procurar online ou descarregar pdf Manual de instalação do hardware para Interruptor Cisco Catalyst 2960-X. Cisco Catalyst 2960-X 34 páginas.
Também para Cisco Catalyst 2960-X: Manual de iniciação (25 páginas), Manual do hardware (20 páginas)
Imprimir página
Switch Installation
Attaching the RPS Connector Cover
This section only applies to the switches that have an RPS port.
If an RPS is not connected to the switch, install an RPS connector cover on the back of the switch. Statement
Warning
265
Before You Begin
Note
The Catalyst 2960X-24PSQ-L switches do not have an RPS connector and a cover is not needed.
Procedure
If you are not using an RPS with your switch, use the two Phillips pan-head screws to attach the RPS connector
cover to the back of the switch.
Figure 15: Attaching the RPS Connector Cover
1
2
OL-28309-02
Phillips pan-head screws (48-0482-01)
RPS connector cover
3
RPS connector
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Wall-Mounting
19