Cisco Catalyst 2960-X 하드웨어 설치 매뉴얼 - 페이지 19
{카테고리_이름} Cisco Catalyst 2960-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-X 34 페이지.
Cisco Catalyst 2960-X에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (25 페이지), 하드웨어 매뉴얼 (20 페이지)
페이지 인쇄
Switch Installation
Attaching the RPS Connector Cover
This section only applies to the switches that have an RPS port.
If an RPS is not connected to the switch, install an RPS connector cover on the back of the switch. Statement
Warning
265
Before You Begin
Note
The Catalyst 2960X-24PSQ-L switches do not have an RPS connector and a cover is not needed.
Procedure
If you are not using an RPS with your switch, use the two Phillips pan-head screws to attach the RPS connector
cover to the back of the switch.
Figure 15: Attaching the RPS Connector Cover
1
2
OL-28309-02
Phillips pan-head screws (48-0482-01)
RPS connector cover
3
RPS connector
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Wall-Mounting
19