FIBARO FGMS-001 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Acessórios FIBARO FGMS-001. FIBARO FGMS-001 11 páginas. Motion sensor
Também para FIBARO FGMS-001: Manual de instruções (20 páginas), Manual de instruções (2 páginas)
Imprimir página
4
#1: Description and features
FIBARO Motion Sensor is a universal Z-Wave multi-sensor. Along
with detecting motion the device measures the temperature and
light intensity. The sensor has a built-in accelerometer to detect any
tampering of the device. FIBARO Motion Sensor is battery powered
device and designed to be installed quickly and easily on any surface.
The LED indicator signals motion, temperature level, operating
mode and can be used to see if device is within the Z-Wave network.
The motion sensor can be used for lighting scenes and presence
monitoring systems.
i
Main features of FIBARO Motion Sensor:
NOTE
•
compatible with any Z-Wave or Z-Wave+ Controller
This device may be
used with all devices
•
supports protected mode (Z-Wave network security mode) with AES-
certified with Z-Wave
128 encryption
Plus certificate and
•
detects motion using a passive IR sensor
should be compatible
with such devices pro-
•
measures ambient temperature
duced by other manu-
facturers.
•
measures light intensity
•
detects vibrations
•
extremely easy installation
i
NOTE
•
may be installed anywhere - wall or any surface
FIBARO Motion Sensor
•
battery powered
is a Security Enabled
•
theft and tampering protection - once vibrations are detected, the
Z-Wave Plus product
notification is sent to the main controller
and a Security Ena-
bled Z-Wave Control-
•
detected movement, temperature and vibrations are signalled by
ler must be used in or-
the built-in LED diode
der to fully utilize the
product.
DESCRIPTIOn AnD FEATuRES
FIBARO Motion Sensor is a fully
compatible Z-Wave PLUS device.
#2: Basic activation
1. Turn the cover counter-clockwise and open it.
2. Remove the battery blocker.
3. Add the device (see "Adding/removing the device" on page 6).
4. Wake up the sensor by triple clicking the B-button.
B-button
5. Close the cover and turn it clockwise.
6. Install the device (see "Physical installation" on page 7).
5
BASIC ACTIvATIOn