Digit-KD VISION series Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Teclado Digit-KD VISION series. Digit-KD VISION series 12 páginas. Remote keypad with lcd display

Imprimir página
ENGLISH

5.0. MAINTENANCE STATUS

As soon as the control panel is powered up, it switches au-
tomatically into Maintenance status. On the keypad the
"TEST" LED will flash slowly and, if no zone is triggered,
on the display the message shown will appear:
In the case that an alarm has been triggered in one or more
zones, the zone will be indicated on the display starting
from the highest priority. At equal priority level, the first zone
violated will be indicated.
To verify if there are others zones triggered,
press more times the button "FORWARD".
On the display will be visualized the menu with
the list of all zones, plus Bat (low battery), Tmp
(tamper) and Firendio (fire).
Next to each triggered zone a dot lit will appear
(see example on the right).

6.0. DISARMING

With the control panel in Maintenance, armed or Test-
Control status, to disarm the control panel proceed as
follows:
Digit one of any of the memorized
codes (example 1, 2, 3). On the
display 3 asterisks will appear.
Press the button
panel emits 2 beeps (only from control
panel armed to disarmed). On the display
"OFF" appears. The control panel is disarmed.
If while the control panel is armed alarms
have been triggered, when you disarm, on
the display the message related to the last
zone that has been triggered flashes
slowly (see example on the right).
To verify if other alarms have been
triggered, press more times the button
"FORWARD". On the display will be
ualized the menu with the list of all zones,
plus Bat (low battery), Tmp (tamper) and
Firendio (fire). Next to each triggered
zone a dot will appear that flashes slowly
(see example on the right).
Page 6
to confirm. The control
vis-
MAINT
OK
MAINT
fire wire
Fire zone in alarm
1
2
MAINT
3
4
OK
Zones 3 and 4 in alarm
MAINT
OK
***
OFF
OK
OFF
Z.2 filo
In the above example, the
"zone 2" has triggered an alarm
1
2
OFF
3
4
In the above example, the
"zone 3" has triggered an alarm
Digit-KD instruction manual