Siemens SIMATIC NET Manual de instalação - Página 20

Procurar online ou descarregar pdf Manual de instalação para Equipamento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 34 páginas. Network components bus terminal
Também para Siemens SIMATIC NET: Manual de Instruções (29 páginas), Manual de Instruções (50 páginas), Manual de Instruções (28 páginas), Manual de instruções de montagem (6 páginas), Informações sobre o produto (6 páginas), Manual de instalação (40 páginas), Manual de instalação (50 páginas), Manual de instalação (40 páginas), Manual de referência (14 páginas), Manual de instalação (48 páginas), Manual de Instruções (32 páginas)

2.6.2

Connecting DC Power

To connect a low DC power supply to the device, do the following:

Electrical hazard – risk of damage to equipment

Before testing the dielectric strength (HIPOT) in the field, remove the braided

ground cable connected to the surge ground terminal and chassis ground. This cable

connects transient suppression circuitry to chassis ground and must be removed in

order to avoid damage to transient suppression circuitry during testing.

RUGGEDCOM RP100

Installation Manual, 01/2021, C79000-G8976-1011-05

Connect the positive wire from the power source to the positive/live (+/L)

terminal on the terminal block.

Positive/Live (+/L) Terminal

Negative/Neutral (-/N) Terminal

Surge Ground Terminal

Braided Ground Cable

Figure 2.5

Terminal Block Wiring

Connect the negative wire from the power source to the negative/neutral (-/N)

terminal on the terminal block.

Using a braided wire or other appropriate grounding wire, connect the surge

ground terminal to the chassis ground connection. The surge ground terminal

is used as the ground conductor for all surge and transient suppression circuitry

internal to the unit.

Connect the ground terminal on the power source to the chassis ground

terminal on the device. For more information, refer to

(Page

9)".

NOTICE

Installing the Device

2.6.2 Connecting DC Power

"Grounding the Device