Siemens SINUMERIK 828D Turning Manual - Página 24

Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens SINUMERIK 828D Turning. Siemens SINUMERIK 828D Turning 49 páginas. Output of setpoints to analog drives - retrofit solution
Também para Siemens SINUMERIK 828D Turning: Instruções de ligação (16 páginas)

Imprimir página

1. Schematic Diagram

3 Commissioning

Fig. 3-19 Linear axis

You can change the servo gain factor via parameter p1475 (speed controller loop

gain). When you increase the parameter value, the servo gain factor is reduced.

You can also influence the servo gain factor by turning the tacho potentiometer at

the analog drive (tachometer calibration).

Fig. 3-20 Service axis/spindle

Sollwertausgabe an analoge Antriebe

Entry ID: 109761423,

V1.0,

Der errechnete Kv-Faktor stimmt exakt

mit der Vorgabe im MD32200

POSCTRL_GAIN überein, wenn p1475

optimal eingestellt ist.

10/2018

Sollwert

Istwert