Siemens HB26D555W Manual de instruções - Página 21

Procurar online ou descarregar pdf Manual de instruções para Forno Siemens HB26D555W. Siemens HB26D555W 32 páginas.

Imprimir página

Troubleshooting

Malfunctions often have simple explanations. Please read the

following instructions before calling the after-sales service.

Repairs may only be carried out by fully trained after-sales

service technicians. Incorrect repairs to your appliance may

present considerable risks for the user.

Problem

The appliance does not work

The appliance cannot be started

The appliance cannot be started. The fol-

lowing appears in the on the display:

"Continue operation with 'start'"

"Descale"

The appliance cannot be started. The fol-

lowing appears on the display:

"Continue operation with 'start'"

"Clean"

"Clock" is shown in the display

The appliance is not in operation. A cook-

ing time is shown on the display.

"Fill water tank" appears even though the

water tank is full

"Fill water tank" appears even though the

water tank is not yet empty, or the water

tank is empty but "Fill water tank" does not

appear

The water tank empties for no discernible

reason. The evaporator dish is overflowing

The evaporator dish has boiled empty

even though the water tank is full.

"Empty tank/clean?" appears in the dis-

play

There is a "pop" noise during cooking

When you cook with steam, a lot of steam

is created

When cooking with steam, there is again a

lot of steam

Steam escapes from the ventilation slots

during cooking

Work on the appliance electronics may only be performed by

■

a specialist.

Always disconnect the appliance from the power supply

■

when work is carried out on the electronics. Switch off the

circuit breaker or remove the fuse from your household fuse

box.

Possible cause

The plug is not plugged in.

Power cut

Fuse defective

Faulty operation

The appliance door is not fully closed

Descaling has been cancelled

Cleaning aid has been cancelled

Power cut

The rotary selector was accidentally oper-

ated

The Start button was not pressed after the

setting was made

The water tank has not been inserted

properly

The detection system is not working

The water tank is dirty. The mobile water

level indicators are jammed

The water tank was not closed properly

The tank lid seal is dirty

The seal in the tank cover is defective

The water tank has not been inserted

properly

The feed line is blocked

The appliance has not been used for at

least two days and the water tank is full

Cold/warm effect with frozen food, caused

by the steam

The appliance is being automatically cali-

brated

The appliance is unable to calibrate itself

automatically if cooking times are too

short

Risk of electric shock!

Notes/remedy

Connect the appliance to the electricity

supply

Check whether other kitchen appliances

are working

Check in the fuse box to make sure that

the fuse for the appliance is OK

Switch the appliance off using the fuse in

the fuse box. Wait approx. 10 seconds

and then switch it back on

Close the appliance door.

Press the Start button. Then rinse the

appliance twice (see section: Descaling.

Proceed as described in the section "Emp-

tying the evaporator dish and refilling the

water tank")

Press the Start button. Then rinse the

appliance twice (see section: Cleaning aid.

Proceed as described in the section "Emp-

tying the evaporator dish and wiping out

the appliance")

Reset the Clock

(see section: Time-setting options)

Press the Stop button

Press the Start button or delete the setting

with the Stop button

Slide in the water tank until it engages

Call the after-sales service

Shake and clean the water tank. If the

parts cannot be released, obtain a new

water tank from the after-sales service.

Close the lid until you feel it engage.

Clean the seal

Obtain a new water tank from the after-

sales service

Slide in the water tank until it engages

Descale the appliance. Check whether the

water hardness range is set correctly

Empty and clean the water tank. Always

empty the water tank after cooking

This is normal

Restore the appliance to the factory set-

ting (see section: Basic settings). Then

start steaming at 100 °C for 20 minutes

This is normal