Siemens WM..T SERIES Manual de instruções e instruções de instalação - Página 29

Procurar online ou descarregar pdf Manual de instruções e instruções de instalação para Máquina de lavar roupa Siemens WM..T SERIES. Siemens WM..T SERIES 40 páginas.

Imprimir página

VoltMonitor

The automatic voltage control system

detects an unacceptable low voltage

supply. The colon on the Ready in

display is flashing while there is an

unacceptable undervoltage supply.

Once the supply voltage is stable again,

the colon of the Ready in display lights

up (Normal mode).

The detected voltage under-usage is

indicated in the further program

sequence by all three points lighting up

in the display.

Voltage under-usages can for

Note:

example result in program extensions

and/or non-satisfactory results.

Setting the signal

You can change the following settings:

S e t t i n g t h e s i g n a l

The volume of the information

■

signals (e.g. at the end of the

program) and/or

The volume of the button signals.

■

You will need to activate the setting

mode in order to change these settings.

Setting the signal

Activating the setting mode

Select the Cottons program at

position 1. The washing machine is

switched on.

Press the ‹ button and, at the same

time, turn the program selector

clockwise to position 2. Release the

button.

The setting mode is activated and the

preset volume for the information

signals appears in the display panel.

Changing the volume

To change the volume of the

■

information signals, use the Finish in-

time button, while the program

selector remains at position 2.

To change the volume of the button

■

signals, rotate the program selector

to position 3. Use again the Finish in-

time button to change the volume.

0 = off, 1 = quiet,

2 = medium, 3 = loud,

4 = very loud

Exiting setting mode

You can now end the process and set

the program selector to the off position.

The settings are saved.