Siemens WM10K161GR Manual de instruções e instruções de instalação - Página 26
Procurar online ou descarregar pdf Manual de instruções e instruções de instalação para Máquina de lavar roupa Siemens WM10K161GR. Siemens WM10K161GR 38 páginas.
Imprimir página
Faults and what to do about them.
en
Faults
The programme duration
changes during the wash
cycle.
Residual water in the
compartment i for care
products.
Odours in the washing
machine.
The xsymbol flashes in
the display panel. Foam
may escape from the
detergent drawer.
Intense noise, vibrations
and "wandering" during
spinning.
Display panel/indicator
lamps do not function dur-
ing operation.
Detergent residues on the
laundry.
NO
appears in the
display panel in reload
mode.
YES appears in the dis-
play panel in reload
mode.
If you cannot correct a fault yourself (after switching off/on) or a repair is required:
Turn the programme selector to Off. Appliance is switched off.
■
Unplug the mains plug from the socket.
■
Turn off the water tap and call the after-sales service.
■
26
Cause/remedial action
Not a fault – the programme sequence is optimised for the particular washing
process. This may lead to changes in the programme duration in the display
panel.
Not a fault – the effect of the care product is not impaired.
■
Clean the insert if necessary.
■
Run the Cotton 90 °C programme without laundry.
Use standard detergent.
Too much detergent used?
Mix one tablespoon of fabric softener with 1/2 litre water and pour it into com-
partment II (not for outdoor fabrics, sportswear fabrics or those made with
down).
Reduce the detergent dosage for the next wash cycle.
Is the appliance levelled? Level the appliance. ~ Page 34
■
Are the appliance feet fixed? Secure the appliance feet. ~ Page 34
■
Transport locks removed? Remove the transport locks. ~ Page 31
■
Power cut?
■
Circuit breakers tripped? Switch the circuit breakers back on or replace
■
them.
If the fault occurs repeatedly, call the after-sales service.
■
Occasionally, phosphate-free detergents contain water-insoluble residues.
■
Select Rinse or brush the laundry after washing.
■
Water level too high. Not possible to add laundry. Close the washing
■
machine door immediately, if necessary.
Select Start/Reload to continue the programme.
■
The washing machine door is unlocked. It is possible to add laundry.