Cisco 7940G Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP Cisco 7940G. Cisco 7940G 21 páginas. Ios telephony services ip phone
Também para Cisco 7940G: Manual do utilizador (25 páginas), Ficha de dados (7 páginas), Manual (35 páginas), Referência rápida (2 páginas), Manual do utilizador (15 páginas), Manual de referência rápida (2 páginas), Manual do utilizador (20 páginas), Manual do telefone (17 páginas), Manual do Administrador (15 páginas), Manual do utilizador (16 páginas), Manual de referência (24 páginas), Manual de Administração (29 páginas), Manual (21 páginas), Manual de instalação (12 páginas), Manual do utilizador (10 páginas)

• cBarge—Use this soft key to add yourself to an existing call on a shared line and to turn the call into a standard conference

call. This feature is available only on phones that use shared lines.

Meet-Me Conference Calls

A Meet-Me conference call involves up to eight parties.

You can create a Meet-Me conference by calling the Meet-Me phone number at a specified time.

Ad Hoc Conference Calls

An Ad Hoc conference call involves up to 32 parties.

You can create an Ad Hoc conference call the same way you do a standard conference call.

Place a Conference Call

To place a three-party conference call, use the following method:

1. During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.

2. Place a call to another number.

3. When the call connects, press the Confrn soft key again to add the new party to the existing call with the first party.

To establish a conference call between two callers to a Cisco Unified IP phone, one active and the other on hold, press the Confrn

soft key.

To establish a conference call between two callers already present on a Cisco Unified IP phone, using separate line buttons, one

active and the other on hold, use the following method:

1. Press the Confrn soft key.

2. Press the Line button of the call you want to add to the three-party conference.

To end the conference call, use one of the following methods:

• Hang up the handset.

• Press the EndCall soft key.

Alternate Methods to End a Conference Call

Call initiators may use one of the following methods (functions vary according to your system configuration):

• To end the conference and remain connected to the most recent call, press the Confrn soft key. The older call is placed on

hold.

• To disconnect from the conference, hang up the handset. The other parties remain on the conference call.

Meet-Me conferencing allows you to start or join a conference by dialing the conference number and supports up to 32 parties.

To start a Meet-Me conference, use the following method:

1. Obtain a Meet-Me phone number from your system administrator.

2. Distribute the number to participants.

3. Obtain a dial tone, then press the the more > MeetMe soft keys.

4. Dial the Meet-Me conference number. Participants can now join the conference by dialing in.

Note

You hear a busy tone if you call the conference before the initiator has joined. If this happens, try your call again.

To end a Meet-Me conference, all participants must hang up. The conference does not automatically end when the conference

initiator disconnects.