Siemens SITRANS RD500 Manual de Instruções - Página 10

Procurar online ou descarregar pdf Manual de Instruções para Interruptor Siemens SITRANS RD500. Siemens SITRANS RD500 48 páginas. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Também para Siemens SITRANS RD500: Manual de Instruções (8 páginas), Manual de Instruções (8 páginas), Manual de Instruções (8 páginas), Manual de aplicação (6 páginas), Manual (11 páginas), Exemplos de aplicação (9 páginas)

Using with Mozilla Firefox

Please note that setup option locations and settings may vary among versions.

Open your browser.

Click Tools and select Options.

Click the Privacy tab and then click the Cookies tab.

Check Allow site to set Cookies.

Click OK to save your new settings and close the Options box.

Connection

On the instruction manual CD included with the product, you will find the

Note:

RD500 USB Windows-based configuration application. This application can be

used by connecting your PC to the RD500 with a USB type A to B cable. The RD500

USB application allows for firmware updates, resetting of the password, setting

the IP address, and resetting the RD500 to factory defaults.

This utility is also available on our website at

www.siemens.com/sitransRD500 under Downloads.

For initial setup, connect to the RD500 via an Ethernet crossover cable. This will allow a

point-to-point connection to your PC for the purpose of configuration and application

testing.

The RD500's default IP address is 192.168.2.100. For a simple network, the first three

octets of your PC's IP address must match the RD500's. Therefore, a suitable IP for your

PC would be 192.168.2.10.

The crossover Ethernet cable is used for a point-to-point network, while a

Note:

standard straight-through Ethernet cable is used in most LAN or WAN networks.

Straight-through Ethernet cable can be used for direct connection if PC or laptop

supports auto crossover detection.

Page 8

SITRANS RD500 – OPERATING INSTRUCTIONS

7ML19985MA01