Siemens SN23E831TI Manual de Instruções - Página 10
Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Siemens SN23E831TI. Siemens SN23E831TI 40 páginas.
Imprimir página
en
Water softening system/Special salt
Appliance interior
1" Top basket
1* Knife shelf *
12 Tablet collecting tray
1: Top spray arm
1B Bottom spray arm
1J Dispenser for special salt
1R Filters
1Z Cutlery basket
1b Bottom basket
1j Dispenser for rinse aid
9" Detergent dispenser
9* Lock for detergent dispenser
92 Rating plate
* depending on model
+
Water softening
system/Special salt
W a t e r s o f te n i n g s y s te m /S p e c i a l s a l t
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above a specific
degree of water hardness must be
softened, i.e. descaled,
for use in a dishwasher. Water
is softened with special salt in the water
softening system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).
10
Setting
The amount of salt dispensed can be
set in 4 stages
depending on the hardness of your
water. Accordingly 0, 1, 2 or 3 displays
are lit (see table). Factory setting: 1.
1. Find out about the hardness
value of your tap water. Your water
utility company will help you with this.
2. Setting can be found in the water
hardness table.
3. Close the door.
4. Switch on ON/OFF switch (.
The Cleaning display )* flashes.
5. Press and hold down the START
button @.
6. Rotate programme selector 8 until
the salt refill indicator ` flashes.
7. Release button.
The salt refill indicator ` flashes
and the display "Check water
supply" h are lit (= Setting 1).
To change the setting:
1. Rotate programme selector 8 until
the required setting has been
selected.
2. Press START button @.
The salt refill indicator ` goes out.
The selected setting is saved.