Cisco Cisco 7960 Manual do utilizador - Página 4

How to Use the Handset, Speakerphone, and Headset

You can place and answer calls using the handset, speakerphone, or a headset. The following

sections describe their use and how to adjust the call volume.

• Using the Handset, page 4

• Using the Speakerphone, page 4

• Using the Headset, page 4

• Adjusting the Handset, Speakerphone, or Headset Volume, page 5

Using the Handset

To place or answer calls with the handset, lift the handset from the earpiece rest. To change from

handset to speakerphone, press the SPEAKER button and put the handset on the earpiece rest.

Using the Speakerphone

To place or answer calls using the speakerphone, press the SPEAKER button. You can use the

speakerphone with all the Cisco IP Phone 7940/7960 features. To change from speakerphone to

handset, lift the handset from the earpiece rest.

Using the Headset

To place or answer calls using the headset, plug the approved headset connector into the

headset port (top) on the back of the phone base and press the HEADSET button.

You can use the headset with all Cisco IP Phone 7940/7960 features. The VOLUME and MUTE

controls also adjust volume to the ear piece and mute the speech path of the headset.

The Cisco IP Phone 7940/7960 supports a four- or six-wire headset jack (Plantronics H series

compatible is required). For information on the headset models supported, see the IP phone

information on

http://cisco.getheadsets.com

Hostcomm Hosted Telephony

Using the Cisco IP Phone 7940/7960

http://vxicorp.com/cisco.

User Guide