Cisco Cisco 7960 Manual do utilizador - Página 7

Cisco 7960/7940 IP Phone Soft Features

Parking a Call

Park a call when you want to store the call and then retrieve the call from another IP

Phone. Call Park numbers are pre-configured by your system administrator. Follow the

below steps to park a call:

Step 1) During an active call, press the more soft key until you see the Park tab.

Step 2) Press the Park tab soft key. The LCD screen displays a special call park number

at which the call is stored.

Step 3) Make a note of the call park number and then hang up. The call is parked at that

number, allowing you to retrieve it from another phone.

Step 4) To retrieve the parked call from another phone, dial the call park number at

which the call is parked.

Note: You have a limited amount of time to retrieve the parked call before it reverts to

ringing at its original destination.

Transferring a Call

Follow these steps to Transfer a call to another extension.

Step 1) While on the call, press the Trnsfer soft key (this places the caller on hold).

Step 2) Dial the office extension to which you want to transfer the call.

Step 3) When it rings on the transferred to extension, press Trnsfer soft key again, or

when the party answers the call, announce the call and press the Trnsfer soft

key again.

Step 4) Hang up the phone or end the call.

Note: If the party refuses the call, press the Resume soft key to return to the original

call.

Forward All Calls

Call Forwarding allows you to redirect all incoming calls from your Cisco IP Phone to

another number.

Step 1) Press the CFwdALL soft key (you will hear two beeps).

Step 2) Dial the 4-digit extension to which all calls will be forwarded.