Ricoh Aficio CL3000DN Manual de Suplementos - Página 9

Procurar online ou descarregar pdf Manual de Suplementos para Impressora Ricoh Aficio CL3000DN. Ricoh Aficio CL3000DN 38 páginas. Unix supplement
Também para Ricoh Aficio CL3000DN: Manual de opções (48 páginas)

Imprimir página

Checking the IP address configuration

Follow the procedure below to make sure that the IP address has been config-

ured correctly.

• The following procedure uses the sample IP address: 192.168.15.16.

A A A A

Enter the following:

# ping 192.168.15.16

If the address has been configured correctly, the following message appears.

192.168.15.16 is alive

If the address has been configured incorrectly, the following message ap-

pears.

no answer from 192.168.15.16

Note

❒ When you use NIS, the IP address and host name are written to /etc/hosts

on the master server. When you use DNS, the information is written to a

data file on the name server. After writing the host name and IP address to

the file, make sure that the configuration is correct by pinging the host

name.

# ping host_name

❒ If the host name is registered with an IP address, the server can access the

printer using its host name instead of its IP address.

Executing the Installation Shell Script

After having configured the printer IP address, follow the procedure below to

execute the installation shell script and setup the workstation printing environ-

ment.

Preparation

Before executing the installation shell script, the IP address, the host name

and the printer name are required.

The following procedures use sample IP address: 192.168.15.16, sample host

name: nphost and sample printer name: np.

Note

❒ Use ftp to get the installation shell script from the printer.

A A A A

Log on to the workstation as root.

Note

❒ If you do not log on as root, the installation shell script will not run.

Using the Installation Shell Script