Ricoh Aficio CL3000DN Посібник з доповнення - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з доповнення для Принтер Ricoh Aficio CL3000DN. Ricoh Aficio CL3000DN 38 сторінок. Unix supplement
Також для Ricoh Aficio CL3000DN: Посібник з опцій (48 сторінок)
Друкувати сторінкуChecking the IP address configuration
Follow the procedure below to make sure that the IP address has been config-
ured correctly.
• The following procedure uses the sample IP address: 192.168.15.16.
A A A A
Enter the following:
# ping 192.168.15.16
If the address has been configured correctly, the following message appears.
192.168.15.16 is alive
If the address has been configured incorrectly, the following message ap-
pears.
no answer from 192.168.15.16
Note
❒ When you use NIS, the IP address and host name are written to /etc/hosts
on the master server. When you use DNS, the information is written to a
data file on the name server. After writing the host name and IP address to
the file, make sure that the configuration is correct by pinging the host
name.
# ping host_name
❒ If the host name is registered with an IP address, the server can access the
printer using its host name instead of its IP address.
Executing the Installation Shell Script
After having configured the printer IP address, follow the procedure below to
execute the installation shell script and setup the workstation printing environ-
ment.
Preparation
Before executing the installation shell script, the IP address, the host name
and the printer name are required.
The following procedures use sample IP address: 192.168.15.16, sample host
name: nphost and sample printer name: np.
Note
❒ Use ftp to get the installation shell script from the printer.
A A A A
Log on to the workstation as root.
Note
❒ If you do not log on as root, the installation shell script will not run.
Using the Installation Shell Script
1
5