Cisco 1600 series Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco 1600 series. Cisco 1600 series 8 páginas. Rdiag router analog ipsec
Também para Cisco 1600 series: Manual de início rápido (12 páginas), Instalação ou substituição do manual (10 páginas), Manual de instalação do hardware (14 páginas)

Install the Router (continued).

A. Connect the router to the local networks.

The router has three Ethernet ports, but supports only two Ethernet connections at one time. Connect the router

to your local Ethernet networks in one of these ways:

Option 1:

Connect the ETHERNET Ø 10BASET port and the ETHERNET 1 10BASET port.

Option 2:

Connect the ETHERNET Ø AUI port and the ETHERNET 1 10BASET port.

Option 1

You need two RJ-45-to-RJ-45 cables and two

Ethernet hubs or switches for this option.

Step 1

Connect one end of the ﬁrst cable to the

yellow ETHERNET Ø 10BASET port, and connect

the other end to a network port on the hub or switch.

LNK LED

Step 2

Connect the second cable to the yellow

ETHERNET 1 10BASET port as described in Step 1.

LNK LED

Option 2

You need one RJ-45-to-RJ-45 cable, one AUI cable,

and an Ethernet transceiver for this option. If the

transceiver connects directly to the router, you do

not need the AUI cable.

Step 1

Connect the Ethernet transceiver to the

yellow ETHERNET Ø AUI port, and connect the

transceiver to the local network.

Step 2

Connect one end of the RJ-45 cable to the

yellow ETHERNET 1 10BASET port, and connect

the other end to a network port on the hub or switch.

LNK LED