Cisco 2811 Series Operações

Procurar online ou descarregar pdf Operações para Router de rede Cisco 2811 Series. Cisco 2811 Series 31 páginas. 2800 series integrated services routers
Também para Cisco 2811 Series: Ficha de dados (20 páginas), Instalação e atualização (14 páginas), Operações (31 páginas), Manual de início rápido (47 páginas)

Imprimir página

1. Initial Setup

Cisco 2811 and Cisco 2821 Integrated Services

Router FIPS 140-2 Non Proprietary Security

Policy

Level 2 Validation

Version 1.3

November 23, 2005

Introduction

This document is the non-proprietary Cryptographic Module Security Policy for the Cisco 2811 and

Cisco 2821 Integrated Services Router without an AIM card installed. This security policy describes

how the Cisco 2811 and Cisco 2821 Integrated Services Router (Hardware Version: 2811 or 2821;

Firmware Version: 12.3(11)T03) meet the security requirements of FIPS 140-2, and how to operate the

router enabled in a secure FIPS 140-2 mode. This policy was prepared aspart of the Level 2 FIPS 140-2

validation of the Cisco 2811 or Cisco 2821 Integrated Services Router.

FIPS 140-2 (Federal Information Processing Standards Publication 140-2—Security Requirements for

Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More

information about the FIPS 140-2 standard and validation program is available on the NIST website at

http://csrc.nist.gov/cryptval/.

This document contains the following sections:

•

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Introduction, page 1

Cisco 2811 and Cisco 2821 Routers, page 2

Secure Operation of the Cisco 2811 or Cisco 2821 router, page 22