Cisco 2811 Series Instalação e atualização
Procurar online ou descarregar pdf Instalação e atualização para Router de rede Cisco 2811 Series. Cisco 2811 Series 14 páginas. 2800 series integrated services routers
Também para Cisco 2811 Series: Ficha de dados (20 páginas), Operações (31 páginas), Operações (31 páginas), Manual de início rápido (47 páginas)
Imprimir página
Installing and Upgrading Fans in Cisco 2811
Series Routers
This document describes how to install or upgrade fans that are located internally within a Cisco 2811
series integrated services router. You need to remove the cover from the router to install or remove any
of these items. The document contains the following sections:
•
•
•
•
•
Before you begin the fan replacement procedure, disconnect the power and remove the cover, as
described in the
replacement procedure, install the chassis cover as described in the
section on page
Safety Warnings
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Warning
Statement 1
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Safety Warnings, page 1
Removing the Chassis Cover, page 2
Locating the Fan, page 5
Installing and Removing the Fans, page 5
Installing the Chassis Cover, page 13
"Removing the Chassis Cover" section on page
13.
2. After you complete the fan
"Installing the Chassis Cover"