Cisco 2811 Series Instalação e atualização - Página 6
Procurar online ou descarregar pdf Instalação e atualização para Router de rede Cisco 2811 Series. Cisco 2811 Series 14 páginas. 2800 series integrated services routers
Também para Cisco 2811 Series: Ficha de dados (20 páginas), Operações (31 páginas), Operações (31 páginas), Manual de início rápido (47 páginas)
Imprimir página
Installing and Removing the Fans
Removing the System Fans
To remove a system fan, perform the following procedure. To complete this procedure, you may need a
flat-blade screwdriver.
Locate the fans to be removed. See
Step 1
Disconnect the fan connector from the system board as shown in
Step 2
Figure 5
Remove the fan wire from the wire management clip, which is located on the chassis base as shown in
Step 3
Figure
Figure 6
Remove the fan by sliding it upward, and then tilting it toward the chassis wall as shown in
Step 4
Note
Installing and Upgrading Fans in Cisco 2811 Series Routers
6
Disconnecting the System Fan Connector from the System Board
6.
Removing the Fan Wire from the Wire Management Clip
If the fan is difficult to grasp when sliding upward, use a flat-blade driver for leverage as shown
in
Figure
7.
Figure 4
for the location of the fans.
Figure
5.
Figure
8.
78-17850-01