- ページ 6

ネットワーク・ルーター Cisco 2811 SeriesのPDF インストールとアップグレードをオンラインで閲覧またはダウンロードできます。Cisco 2811 Series 14 ページ。 2800 series integrated services routers
Cisco 2811 Series にも：データシート (20 ページ), オペレーション (31 ページ), オペレーション (31 ページ), クイック・スタート・マニュアル (47 ページ)

ページを印刷する

Installing and Removing the Fans

Removing the System Fans

To remove a system fan, perform the following procedure. To complete this procedure, you may need a

flat-blade screwdriver.

Locate the fans to be removed. See

Step 1

Disconnect the fan connector from the system board as shown in

Step 2

Figure 5

Remove the fan wire from the wire management clip, which is located on the chassis base as shown in

Step 3

Figure

Figure 6

Remove the fan by sliding it upward, and then tilting it toward the chassis wall as shown in

Step 4

Note

Installing and Upgrading Fans in Cisco 2811 Series Routers

Disconnecting the System Fan Connector from the System Board

Removing the Fan Wire from the Wire Management Clip

If the fan is difficult to grasp when sliding upward, use a flat-blade driver for leverage as shown

Figure

Figure 4

for the location of the fans.

Figure

78-17850-01