Cisco 2811 Series 설치 및 업그레이드 - 페이지 6
{카테고리_이름} Cisco 2811 Series에 대한 설치 및 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2811 Series 14 페이지. 2800 series integrated services routers
Cisco 2811 Series에 대해서도 마찬가지입니다: 데이터시트 (20 페이지), 운영 (31 페이지), 운영 (31 페이지), 빠른 시작 매뉴얼 (47 페이지)
페이지 인쇄
Installing and Removing the Fans
Removing the System Fans
To remove a system fan, perform the following procedure. To complete this procedure, you may need a
flat-blade screwdriver.
Locate the fans to be removed. See
Step 1
Disconnect the fan connector from the system board as shown in
Step 2
Figure 5
Remove the fan wire from the wire management clip, which is located on the chassis base as shown in
Step 3
Figure
Figure 6
Remove the fan by sliding it upward, and then tilting it toward the chassis wall as shown in
Step 4
Note
Installing and Upgrading Fans in Cisco 2811 Series Routers
6
Disconnecting the System Fan Connector from the System Board
6.
Removing the Fan Wire from the Wire Management Clip
If the fan is difficult to grasp when sliding upward, use a flat-blade driver for leverage as shown
in
Figure
7.
Figure 4
for the location of the fans.
Figure
5.
Figure
8.
78-17850-01