Cisco 2811 Series 설치 및 업그레이드 - 페이지 8
{카테고리_이름} Cisco 2811 Series에 대한 설치 및 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2811 Series 14 페이지. 2800 series integrated services routers
Cisco 2811 Series에 대해서도 마찬가지입니다: 데이터시트 (20 페이지), 운영 (31 페이지), 운영 (31 페이지), 빠른 시작 매뉴얼 (47 페이지)
페이지 인쇄
Installing and Removing the Fans
Removing the Power Supply Fan
To remove the power supply fan, perform the following procedure. To complete this procedure, you may
need a flat-blade screwdriver.
Locate the fan to be removed. See
Step 1
Disconnect the fan connector from the system board as shown in
Step 2
Figure 9
Lift the ribbon cable to allow slack to remove the air baffle as shown in
Step 3
Note
Installing and Upgrading Fans in Cisco 2811 Series Routers
8
Disconnecting the Power Supply Fan Connector
It is not necessary to disconnect the ribbon cable from the CompactFlash printed circuit board
(PCB) or system board.
Figure 4
for the location of the fans.
Figure
9.
Figure
10.
78-17850-01