Cisco 2811 Series Kurulum ve Yükseltme - Sayfa 8
Ağ Yönlendiricisi Cisco 2811 Series için çevrimiçi göz atın veya pdf Kurulum ve Yükseltme indirin. Cisco 2811 Series 14 sayfaları. 2800 series integrated services routers
Ayrıca Cisco 2811 Series için: Veri Sayfası (20 sayfalar), Operasyonlar (31 sayfalar), Operasyonlar (31 sayfalar), Hızlı Başlangıç Kılavuzu (47 sayfalar)
Sayfayı Yazdır
Installing and Removing the Fans
Removing the Power Supply Fan
To remove the power supply fan, perform the following procedure. To complete this procedure, you may
need a flat-blade screwdriver.
Locate the fan to be removed. See
Step 1
Disconnect the fan connector from the system board as shown in
Step 2
Figure 9
Lift the ribbon cable to allow slack to remove the air baffle as shown in
Step 3
Note
Installing and Upgrading Fans in Cisco 2811 Series Routers
8
Disconnecting the Power Supply Fan Connector
It is not necessary to disconnect the ribbon cable from the CompactFlash printed circuit board
(PCB) or system board.
Figure 4
for the location of the fans.
Figure
9.
Figure
10.
78-17850-01