Cisco 2811 Series Installeren en upgraden - Pagina 8
Blader online of download pdf Installeren en upgraden voor {categorie_naam} Cisco 2811 Series. Cisco 2811 Series 14 pagina's. 2800 series integrated services routers
Ook voor Cisco 2811 Series: Gegevensblad (20 pagina's), Werkzaamheden (31 pagina's), Werkzaamheden (31 pagina's), Snelstarthandleiding (47 pagina's)
Pagina afdrukken
Installing and Removing the Fans
Removing the Power Supply Fan
To remove the power supply fan, perform the following procedure. To complete this procedure, you may
need a flat-blade screwdriver.
Locate the fan to be removed. See
Step 1
Disconnect the fan connector from the system board as shown in
Step 2
Figure 9
Lift the ribbon cable to allow slack to remove the air baffle as shown in
Step 3
Note
Installing and Upgrading Fans in Cisco 2811 Series Routers
8
Disconnecting the Power Supply Fan Connector
It is not necessary to disconnect the ribbon cable from the CompactFlash printed circuit board
(PCB) or system board.
Figure 4
for the location of the fans.
Figure
9.
Figure
10.
78-17850-01