Cisco SG 300-10P Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco SG 300-10P. Cisco SG 300-10P 17 páginas. Managed switches
Também para Cisco SG 300-10P: Ficha de dados (14 páginas), Especificações (2 páginas), Manual de configuração rápida (10 páginas), Manual de início rápido (18 páginas), Manual de início rápido (17 páginas), Manual de início rápido (17 páginas)

Mechanical Overloading—The device should be level, stable, and

secure to prevent it from sliding or shifting out of position.

Circuit Overloading—Adding the device to the power outlet must not

overload that circuit.

To rack-mount the switch in any standard rack, attach the rack–mount

brackets to the sides of the switch with the supplied hardware and secure

the brackets tightly.

For stability, load the rack from the bottom to the top, with the

AUTION

heaviest devices on the bottom. A top-heavy rack is likely to

be unstable and may tip over.

Wall Mounting

Only the 8-port models of the switch can be wall-mounted.

The switch should be mounted so that the ports face up or down.

OTE

Do not mount the switch with the ports to the side.

There is a wall-mount kit packed with your switch. The dimensions for the

mount kit are as follows:

1 8 mm/0.4 in

Mount the managed switch to the wall by drilling two pilot holes

3.7 inches (95 mm) apart, attaching the provided anchors and screws to

the wall, then sliding the switch into position on the screws.

The switch should have a minimum of 5 inches (130 mm) of clearance on all

sides.

300 Series Managed Switches

2 22.2 mm/0.9 in 3 6.8 mm/0.3 in 4 17.6 mm/0.7 in