CAB ER4/210 Manual do operador - Página 10
Procurar online ou descarregar pdf Manual do operador para Acessórios para impressoras CAB ER4/210. CAB ER4/210 14 páginas. External rewinder
Também para CAB ER4/210: Manual do operador (14 páginas)
Imprimir página
10
4
Alignment
4.2
Selection of the Rewind Direction
The selection of the rewind direction is depend of using an inside or outside wound label.
Figure 5
Turn off the rewinder and set the switch (1) to the required direction of rewinding:
4.3
Alignment the Guide Axle
Depend of the used printer the guide axle should be aligned so, that the label strip is led horizontally from the printer
to the rewinder.
Figure 6
1
Direction of rewinding
Rewinding with labels inside
Rewinding with labels outside
Alignment the guide axle
1. Loosen the guide axle (1) by turning it counterclockwise.
2. Move it in the guide plate (2) up to the desired positioning.
3. Fasten the guide axle (1) by turning it clockwise.
1
2
10