CAB ER4/210 Operatör El Kitabı - Sayfa 10
Yazıcı Aksesuarları CAB ER4/210 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. CAB ER4/210 14 sayfaları. External rewinder
Ayrıca CAB ER4/210 için: Operatör El Kitabı (14 sayfalar)
Sayfayı Yazdır
10
4
Alignment
4.2
Selection of the Rewind Direction
The selection of the rewind direction is depend of using an inside or outside wound label.
Figure 5
Turn off the rewinder and set the switch (1) to the required direction of rewinding:
4.3
Alignment the Guide Axle
Depend of the used printer the guide axle should be aligned so, that the label strip is led horizontally from the printer
to the rewinder.
Figure 6
1
Direction of rewinding
Rewinding with labels inside
Rewinding with labels outside
Alignment the guide axle
1. Loosen the guide axle (1) by turning it counterclockwise.
2. Move it in the guide plate (2) up to the desired positioning.
3. Fasten the guide axle (1) by turning it clockwise.
1
2
10