Epson V11H248020 - MovieMate 30s WVGA LCD Projector Manual de configuração rápida - Página 2
Procurar online ou descarregar pdf Manual de configuração rápida para Projetor Epson V11H248020 - MovieMate 30s WVGA LCD Projector. Epson V11H248020 - MovieMate 30s WVGA LCD Projector 6 páginas. Product support bulletin(s)
Também para Epson V11H248020 - MovieMate 30s WVGA LCD Projector: Configuração (9 páginas), Manual rápido (32 páginas), Boletim de apoio ao produto (4 páginas)
Imprimir página
2
Choose a location
You can use your MovieMate just about anywhere—in the living room, bedroom,
or even outside. You can use it with an optional subwoofer and screen, or simply
project on a wall and use the built-in audio system.
The following pictures show four different setups.
If you want an 80-inch diagonal size image, place MovieMate about
6
feet away from the wall or screen. The following diagram shows the
1
⁄
2
approximate image size (measured diagonally) at various distances.
If you want to project against a wall, choose a flat white wall with a smooth
surface for best results.
MovieMate doesn't have to be directly in front of the screen or wall, but it
has to face straight ahead (at a 90-degree angle to the projection surface).
If the image is too low, too high, or off to the side, you can use the quick
image adjustment dials to adjust the position. See section 5 on the back
of this sheet.
Make sure you have a grounded electrical outlet, power strip, or extension
cord to plug MovieMate into.