Cisco ASR1006 - ASR 1006 Modular Expansion Base Manual de instalação do hardware - Página 42
Procurar online ou descarregar pdf Manual de instalação do hardware para Ponto de acesso sem fios Cisco ASR1006 - ASR 1006 Modular Expansion Base. Cisco ASR1006 - ASR 1006 Modular Expansion Base 47 páginas. Lightweight access points
Também para Cisco ASR1006 - ASR 1006 Modular Expansion Base: Manual de implantação (40 páginas)
Imprimir página
Figure 21
Handling a SPA
GND
To install a shared port adapter into a SPA interface processor (SIP), follow these steps:
Step 1
Before you begin, make certain the chassis is grounded.
To insert the SPA in the SIP, locate the guide rails inside the SIP that hold the SPA in place. They are at the top left and
Step 2
top right of the SPA slot and are recessed about an inch.
Carefully slide the SPA all the way in the SIP until the SPA is firmly seated in the SPA interface connector. When fully
Step 3
seated, the SPA might be slightly behind the SIP faceplate. See
Figure 22
Installing and Removing a SPA Into and From a SIP
42
Printed circuit board
Metal carrier
AS R1 00 0-S
IP1 0
SPA -4X OC
3-P OS
SPA -4X OC
3-P OS
PW R STA TUS
AS R1 00 0-S
IP1 0
SPA -4X OC
3-P OS
SPA -4X OC
3-P OS
PW R STA TUS
SPA -4X OC
3-P OS
Figure
SPA -4X OC
3-P OS
SPA -4X OC
3-P OS
SPA -4X OC
3-P OS
22.