Cisco MERAKI MR72 Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Ponto de acesso sem fios Cisco MERAKI MR72. Cisco MERAKI MR72 20 páginas.
Também para Cisco MERAKI MR72: Manual de instalação do hardware (16 páginas)

Imprimir página

Remove the Mount Plate from the Access Point

Before installing the mount plate, you must remove it from the back of the access point.

1. Unscrew the mount plate attachment screw.

2. Lift the mount plate release tab upwards.

3. While holding the mount plate release tab up, slide the mount plate off the access point in the direction shown

below.

Attach the mount cradle

The MR72 mount plate can be used to install your access point in a wide range of scenarios.

Wall or Solid Ceiling Mount Using mount cradle

Using included wall anchors and screws, attach the mount plate to your mounting wall or ceiling.

It is recommended that the MR72 be mounted to a wall or solid ceiling using the mount plate for physical security

reasons.

Pole Mount Using Mount Plate

Use the included mounting straps to mount the AP to a pole less than 3.9" in diameter. Thread the mounting straps

through the mounting strap slots to secure the mount plate in a horizontal or vertical orientation.

Attach Grounding Strap

Connect one end of grounding strap to grounding post with included screw and washer. Securely attach the other end

nearby metal structure.