Cisco MERAKI MR72 Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Бездротова точка доступу Cisco MERAKI MR72. Cisco MERAKI MR72 20 сторінок.
Також для Cisco MERAKI MR72: Посібник з встановлення обладнання (16 сторінок)

Cisco MERAKI MR72 Посібник з монтажу

Remove the Mount Plate from the Access Point

Before installing the mount plate, you must remove it from the back of the access point.
1. Unscrew the mount plate attachment screw.
2. Lift the mount plate release tab upwards.
3. While holding the mount plate release tab up, slide the mount plate off the access point in the direction shown
below.

Attach the mount cradle

The MR72 mount plate can be used to install your access point in a wide range of scenarios.
Wall or Solid Ceiling Mount Using mount cradle
Using included wall anchors and screws, attach the mount plate to your mounting wall or ceiling.
It is recommended that the MR72 be mounted to a wall or solid ceiling using the mount plate for physical security
reasons.
Pole Mount Using Mount Plate
Use the included mounting straps to mount the AP to a pole less than 3.9" in diameter. Thread the mounting straps
through the mounting strap slots to secure the mount plate in a horizontal or vertical orientation.
Attach Grounding Strap
Connect one end of grounding strap to grounding post with included screw and washer. Securely attach the other end
nearby metal structure.
7