Cisco Profile Series Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Sistema de conferência Cisco Profile Series. Cisco Profile Series 7 páginas. Jbod on the 12g sas modular raid controller
Também para Cisco Profile Series: Manual de iniciação (41 páginas), Manual do utilizador (44 páginas), Manual de iniciação (35 páginas), Manual de referência rápida (2 páginas), Manual de instalação (44 páginas), Manual de configuração (13 páginas), Folha de instalação (2 páginas), Manual de instalação (2 páginas), Manual de início rápido (4 páginas), Manual de início rápido (4 páginas), Manual de instalação (16 páginas), Manual de iniciação (32 páginas), Manual (16 páginas), Manual de iniciação (42 páginas), Manual de iniciação (46 páginas)

Troubleshooting

Remote site can't hear you



Check that your microphone is not muted.



Check the location of the microphone. In some cases it may be possible

to move the microphone closer to those speaking.



Turn off background noises such as fans and air conditioning.



Ensure people are not speaking in the background.



Speak up a bit.

I can't hear the remote sites



Ask them to do the above.



Check the volume of the system by using the remote control.



Check the volume on the television.

PC image does not display



Check the PC screen resolution. Try setting the resolution to 1024x768.



Use the function keys on the laptop to change the video outputs.

The remote site can't see me



Check to make sure you are not in presentation mode by pressing the

presentation button. That should bring up a screen that says 'no signal'.

Press the presentation button again to go back to the main camera.

System does not connect



For systems connection to the computer network, ensure the IP number is

displayed. If it is not displayed check the computer connection. If

necessary check with your local support team to ensure the data point is

activated.



To dial an outside ISDN line when connected to the computer network you

will need to dial the appropriate prefix. Try using 9 or 3 or ask your local

support team.