Cisco Profile Series Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Sistema de conferência Cisco Profile Series. Cisco Profile Series 44 páginas. Jbod on the 12g sas modular raid controller
Também para Cisco Profile Series: Manual de iniciação (41 páginas), Manual do utilizador (44 páginas), Manual do utilizador (7 páginas), Manual de iniciação (35 páginas), Manual de referência rápida (2 páginas), Manual de configuração (13 páginas), Folha de instalação (2 páginas), Manual de instalação (2 páginas), Manual de início rápido (4 páginas), Manual de início rápido (4 páginas), Manual de instalação (16 páginas), Manual de iniciação (32 páginas), Manual (16 páginas), Manual de iniciação (42 páginas), Manual de iniciação (46 páginas)

When installing the product, please use the provided or designated connection cables/power

Warning

cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical

Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the "UL" shown

on the code) for any other electrical devices than products designated by CISCO. The use of cables

that are certified by Electrical Appliance and Material Safety Law (that have "PSE" shown on the

code) is not limited to CISCO-designated products. Statement 371

Warning

Read the wall-mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people

and damage to the system. Statement 378

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with

Warning

the same or equivalent type recommended by the manufacturer. Dispose of used batteries according

to the manufacturer's instructions. Statement 1015

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network

Warning

voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some

LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

Warning

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection

authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Cisco 800M Series Integrated Services Router Hardware Installation Guide

xiv