Cisco Aironet 340 Series Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco Aironet 340 Series. Cisco Aironet 340 Series 13 páginas. Usb client adapter
Também para Cisco Aironet 340 Series: Manual de início rápido (12 páginas), Notas de lançamento (14 páginas), Manual de início rápido (16 páginas), Manual de início rápido (12 páginas), Manual de início rápido (12 páginas)

Imprimir página
Cisco Aironet 340 Series Manual de início rápido
4
Double-click the BSCU folder to display it.
5
Double-click the setup.exe file. The installation wizard appears.
6
Follow the steps provided by the installation wizard.
7
When requested by the installation wizard, select Talk To A Base Station To Access The
Internet.
8
Select the Launch Base Station Client Utility check box and click Finish to start the utility.
A pop-up window appears reminding you that your SSID and WEP Encryption Key are
currently set to the default values. See the following section to change the SSID and WEP
Encryption Key from their default values.
Configuring a Radio Card
A wireless PC must be configured to communicate with the base station before initial
configuration of the base station can be accomplished. You can configure a PC with a radio
card by using the BSCU or another vendor's IEEE 802.11 DSSS radio card. If you are using
another vendor's radio card, see the Cisco Aironet 340 Series Base Station Hardware
Installation Guide.
Follow these steps to configure the PC and radio card using the BSCU:
1
Select Start > Settings > Control Panel > Network > Protocols > TCP/IP (for the Cisco
Aironet wireless LAN adapters) > Properties to display the TCP/IP Properties window.
Refer to the Cisco Aironet 340 Series Base Station Software Configuration Guide if you
need further assistance.
2
Click the Obtain an IP address from the DHCP server radio button.
3
Double-click the BSCU icon on the PC desktop to activate the utility.
Note
A warning message might be displayed that indicates the SSID and radio network
encryption are set to default values. Click OK.
5