DIGITEN WTC200 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Termostato DIGITEN WTC200. DIGITEN WTC200 12 páginas.
Também para DIGITEN WTC200: Manual do utilizador (8 páginas), Manual do utilizador (9 páginas)

Imprimir página
DIGITEN WTC200 Manual do utilizador
receiver.
2, Press and hold
button, the LED flashes 5 times, then flash 2
times quickly before release the button. All remotes will be unpaired.
If you repair the remote, please repeat the step 1.
Note： A remote can control multiple receivers.
Change the temperature unit
Press the
button for 3 seconds to switch the temperature unit.

Cooling mode

Set the temperature value RUN>STOP, the controller is in cooling
mode, and the LCD displays the COOLING symbol
1.1 When the CURRENT temperature value is higher than the RUN
value, the cooling operation starts, the relay outputs, the LCD displays
, and the green light on the receiver is on. When the CURRENT
value drop to the STOP value, the cooling operation stops, and the
LCD displays
. The green light on the receiver is off.
1.2 When the CURRENT temperature value is less than the RUN
value, the cooling operation stops, the relay has no output, the LCD
displays
, the green light on the receiver is off. When the
CURRENT value rises to the RUN value, the cooling operation starts,
the LCD displays
, the green light on the receiver is on.