Sony XCL-CG510C Manual técnico - Página 11

Procurar online ou descarregar pdf Manual técnico para Câmara digital Sony XCL-CG510C. Sony XCL-CG510C 48 páginas. Digital video camera module

Imprimir página

Connections

Communication Setting

Use the serial port assigned to the image input board for the camera. Communication settings are shown in the table
below. Echo back is performed for input commands.
Echo back can be set OFF to accelerate command responses. Commands are not case sensitive.
Baud rate
921600/460800/230400/115200/57600/38400/19200/14400/9600
Data bit
8
Parity
None
Stop bit
1
Flow control
None
Default values are underlined. (same applies hereinafter)
Command
BAUDRATE
115200/57600/38400/19200/14400/9600
BAUDRATE-TMP
921600/460800/230400/115200/57600/38400/
19200/14400/9600
BAUDRATE-SAVE
921600/460800/230400/115200/57600/38400/
19200/14400/9600
When you increase the baud rate, save them using the BAUDRATE-SAVE command after changing the settings
temporarily using the BAUDRATE-TMP command and confirming the communication between PC is enabled.
Parameter
11
Settings are saved in the camera and will be enabled
after restart.
Settings will be implemented immediately, but not
saved in the camera.
Settings are saved in the camera and will be enabled
after restart.