Cisco ASA 5506W-X Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco ASA 5506W-X. Cisco ASA 5506W-X 10 páginas. Threat defense reimage guide
Também para Cisco ASA 5506W-X: Manual de configuração (13 páginas), Manual de início rápido (14 páginas), Manual de configuração fácil (11 páginas), Manual do software (37 páginas), Montar e ligar (12 páginas), Manual de instalação (46 páginas), Montar o chassis (10 páginas)

Cisco ASA 5506-X Series Quick Start Guide

Click one of the available options: Install ASDM Launcher, Run ASDM, or Run Startup Wizard.

Follow the onscreen instructions to launch ASDM according to the option you chose. The Cisco ASDM-IDM

Launcher appears.

If you click Install ASDM Launcher, in some cases you need to install an identity certificate for the ASA and a

separate certificate for the ASA Firepower module according to

Leave the username and password fields empty, and click OK. The main ASDM window appears.

If you are prompted to provide the IP address of the installed ASA Firepower module, cancel out of the dialog

box. You must first set the module IP address to the correct IP address using the Startup Wizard.

ASDM can change the ASA Firepower module IP address settings over the ASA backplane; but for ASDM to

then manage the module, ASDM must be able to reach the module (and its new IP address) on the

Management 1/1 interface over the network. The recommended deployment allows this access because the

module IP address is on the inside network. If ASDM cannot reach the module on the network after you set

the IP address, then you will see an error.

Choose Wizards > Startup Wizard.

Configure additional ASA settings as desired, or skip screens until you reach the ASA Firepower Basic

Configuration screen.

Install an Identity Certificate for

6. Launch ASDM

ASDM.