Sony MHC-EX5 Manual de Instruções - Página 15
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-EX5. Sony MHC-EX5 29 páginas.
Imprimir páginaOne Touch Play feature
Automatic Source Selection
Recording a CD
Recording a CD
Automatically
nN ©
NUID
ot
1 Press 2 OPEN/CLOSE and place a CD
on the tray. Then, press 2 OPEN/CLOSE
again to close the tray.
Total number of tracks and the total
playing time appears in the display.
2 Press & EJECT and insert a blank tape
into deck B.
Make sure the tabs on the cassette have
not been removed.
3 select dual or single-sided recording.
To record
Set DIRECTION MODE
to
One side
=
Both sides*
>
or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4 when you want to reduce the hiss noise
in low-level high-frequency signals,
switch DOLBY NR selector to B or C.
Dolby C provides greater noise
reduction benefit than Dolby B.
5 press CD SYNCHRO.
Deck B stands by for recording.
The [> (for front side) or <J (for
reverse side) indicator lights steadily
and shows you which side will start
recording. The other indicator flashes for
a few seconds, then disappears.
G ic the indicator for the side you want to
start recording does not light, press >>
or <J to light the side to start recording.
If it lights, skip to step 7.
7 Press 11 PAUSE on the tape player to
release recording pause.
Recording starts.
If the last track on side A has abruptly
been cut, the track will record again
from the beginning on side B when you
choose dual-sided recording.
If you set DIRECTION MODE to > or
RELAY, recording always stops at the
end of the reverse side.
To stop recording
Press 0 on deck B or on the CD player.
Adjusting the volume will not affect the
recording level
But this control will change the sound
levels you hear through the speakers or
headphones.
Recording a CD Manually
You can record a CD as you like, for
instance, recording just the songs you want
or recording from the middle of the tape.
Use the buttons on the unit to do this
operation.
=
N WNoO0
w=
oO
vs
1 Press 8 OPEN/CLOSE and place a CD.
Then, press 2 OPEN/CLOSE again to
close the tray.
Total number of tracks and the total
playing time appear in the display.
2 Press
EJECT and insert a blank tape
into deck B.
Make sure the tabs on the cassette have
not been removed.
3 Press CD (function) to select the CD
player.
4 select dual or single-sided recording.
To record
Set DIRECTION MODE
to
One side
—
Both sides*
>
or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
continue to next page >
Chapter 4: the Tape Player
1 5