Sony MHC-EX5 Kullanım Talimatları Kılavuzu - Sayfa 15

Stereo sistemi Sony MHC-EX5 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-EX5 29 sayfaları.

Sayfayı Yazdır

One Touch Play feature

Automatic Source Selection

Recording a CD

Automatically

nN ©

NUID

1 Press 2 OPEN/CLOSE and place a CD

on the tray. Then, press 2 OPEN/CLOSE

again to close the tray.

Total number of tracks and the total

playing time appears in the display.

2 Press & EJECT and insert a blank tape

into deck B.

Make sure the tabs on the cassette have

not been removed.

3 select dual or single-sided recording.

To record

Set DIRECTION MODE

One side

Both sides*

or RELAY

Recording always stops at the end of the

reverse side. Be sure to start from the

front side.

4 when you want to reduce the hiss noise

in low-level high-frequency signals,

switch DOLBY NR selector to B or C.

Dolby C provides greater noise

reduction benefit than Dolby B.

5 press CD SYNCHRO.

Deck B stands by for recording.

The [> (for front side) or <J (for

reverse side) indicator lights steadily

and shows you which side will start

recording. The other indicator flashes for

a few seconds, then disappears.

G ic the indicator for the side you want to

start recording does not light, press >>

or <J to light the side to start recording.

If it lights, skip to step 7.

7 Press 11 PAUSE on the tape player to

release recording pause.

Recording starts.

If the last track on side A has abruptly

been cut, the track will record again

from the beginning on side B when you

choose dual-sided recording.

If you set DIRECTION MODE to > or

RELAY, recording always stops at the

end of the reverse side.

To stop recording

Press 0 on deck B or on the CD player.

Adjusting the volume will not affect the

recording level

But this control will change the sound

levels you hear through the speakers or

headphones.

Recording a CD Manually

You can record a CD as you like, for

instance, recording just the songs you want

or recording from the middle of the tape.

Use the buttons on the unit to do this

operation.

N WNoO0

1 Press 8 OPEN/CLOSE and place a CD.

Then, press 2 OPEN/CLOSE again to

close the tray.

Total number of tracks and the total

playing time appear in the display.

2 Press

EJECT and insert a blank tape

into deck B.

Make sure the tabs on the cassette have

not been removed.

3 Press CD (function) to select the CD

player.

4 select dual or single-sided recording.