Sony VideoStore BKSR-2030 Manual de instalação - Página 8
Procurar online ou descarregar pdf Manual de instalação para Sistema estéreo Sony VideoStore BKSR-2030. Sony VideoStore BKSR-2030 14 páginas. Sdi output mpeg decoder board
Também para Sony VideoStore BKSR-2030: Instruções de utilização (2 páginas)
Imprimir página
1-2. Board Installation
General Information
. The BKSR-2030 can be inserted into any slot exept slot
No.6 of VSR-2000 is mounted to.
VSR-2000 (Rear side)
. Stick the slot label supplied with the BKSR-2030 onto
the connector panel after the board installation to prevent
the incorrect insertion when the board replacing.
. Do not open the slot to keep the air-cooled effect of
VSR-2000. Be sure to attach the blank panel to vacant
slot.
. It is not necessary to adjust after board installation/
replacement.
Procedures
1. Turn off the power switch of the VSR-2000.
2. Remove the two screws, and remove the blank panel
of any slot.
n
Keep the removed blank panel.
1-2 (E)
Slot No.6
VSR-2000
BVTT
3 x 6
Blank panel
BVTT3 x 6
3. Insert the BKSR-2030 to the slot. Push the handle of
the board in the direction of installing, and insert it in
the mother board completely.
Installing
Removing
4. Secure the BKSR-2030 with the two screws securing
the blank panel.
5. Stick the slot label supplied with the BKSR-2030 onto
the connector panel.
The label's number is the same as the slot number
which the board has inserted.
BKSR-2030
n
To remove the BKSR-2030, hold the handle of the board
and pull it in the direction of removing and remove the
board to the front.
BKSR-2030
Handles
BVTT
3 x 6
Slot label
BKSR-2030